Issue << content << Computer Radiography as Alternative to Conventional Radiographic Film Technology


2013. . No. 4(62) - Dec 2013, pp. 65-70

Computer Radiography as Alternative to Conventional Radiographic Film Technology

K. A. Bagaev, A. B. Spirkov, S. S. Kozlovsky

The main part of the article is devoted to experimental work comparing the quality of images taken with X-ray film usage and with CR systems. Authors provide some results obtained using these techniques. This work was done together with CRISM “PROMETEY” and “RESEARCH INSTITUTE OF RUBBER COATINGS AND PRODUCTS”. The guidelines for the CR technique operation are provided in the third part of the article. The tests are described to be fulfilled periodically to check the CR system operability.
  1. Bagaev K. A., Kozlovsky S. S., Novikov I. E. Apparatura i novosti radiatsionnyh izmereniy [Instrumentation & News of Radiation Measurements]. 2007, no. 4, pp. 35–40 (in Russ.).
  2. EN 14784–1,2:2005. Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 1: Classification of systems — Part 2: General principles for testing of metallic materials using X-rays and gamma rays. GEN, 2005.
  3. ISO 17636–2:2013. Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors. ISO, 2013.
  4. ISO 11699–1:2008. Non-destructive testing— Industrial radiographic film — Part 1: Classification of film systems for industrial radiography. ISO, 2008.
  5. GOST 7512–82. Kontrol nerazrushayushchiy,soedineniya svarnye, radiograficheskiy metod [Nondestructive testing. Welded joints. Radiography method]. IPK Izdatelstvo Standartov, Moscow, 1982 (in Russ.).


5 Udelny Pr.
St. Petersburg
007 812 670 7609

NDT World, Russian Quarterty Journal
©2000-2016 All rights reserved